![]() The inet addr within this text is the most telling in terms of finding out your IP address. But you will need to know that address first of all by running “ifconfig” into the LX terminal.Ī lot of text will be generated but, as you are using an ethernet connection on your Raspberry Pi 2, you would want to be looking at the eth0 line, usually at the top. To do this, you will need to edit the /etc/network/interfaces file to fix the ip address on your Raspberry Pi 2, and make it static instead of dynamic. You will now need to get a fixed ip on your Raspberry Pi 2 now. This updating process may take awhile, so it could be a great time to get a coffee and just relax! Step 4: Get a fixed IP ![]() In the LX terminal, type in “sudo apt-get update”. After which, it’s time to make sure your Raspberry Pi 2 is updated to the latest firmware. Now that your Raspberry Pi 2 is rebooted, you can log in straightaway! The default username is “Pi” and the password is “Raspberry”. Reboot your Raspberry Pi 2 to lock in your options. Next, just press A8 to enable SSH encryption, and you are done. This is necessary as you won’t be using much video RAM on your server, for obvious reasons of graphics not being the priority on a server. Change that value to 16, which means your GPU will have an allocation of 16 MB. An automated process will begin and when it finishes, choose option 8 – Advanced options, and do a (press A4) memory split. ![]() To do this: choose option 1 and press start. The first thing of importance is to expand the filesystem on your SD card so it will enable the maximum amount of space within. You will be at the Raspi-config screen soon enough, on which you will be doing the necessary setups. Let it all start up, and it shouldn’t take more than 15 seconds. Insert your Micro SD card and boot it all up. Now that the Micro-SD is ready, plug in a monitor, and have a mouse and keyboard connected, not to mention, the power supply. Step 2: Now plug all your things into the Raspberry Pi 2 Eject the Micro-SD card and the operating system is fully loaded and ready for your Raspberry Pi. Click on “write” and your image file will be copied onto your Micro-SD. It is important to make sure of the particular letter as the contents of your MicroSD card will be erased as part of the writing process. Select the right disk letter that was allocated to your MicroSD card.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |